ALKYD PAINTS

PRIMERS:

Unikor – Quick-drying primer paint for priming steel and iron.

Unikor primer consists of a suspension of pigments and fillers in a solution of alkyd resin in organic solvents. Active anti-corrosion protection is provided by a system of phosphorus pigments. The obtained coatings are characterised by good adhesion to the substrate, high flexibility, good hardness and resistance to impacts and other mechanical damage, the action of changing temperature and periodic action of sodium chloride solution. It is used for priming steel, cast iron, wood, wood-based materials and zinc surfaces. It can be used in marine and industrial environments and in tropical climates.

Unikor C – paint for temporary protection of steel and iron structures and devices.

Unikor C anti-corrosion primer paint is a suspension of pigments and fillers in a solution of alkyd resin in a mixture of organic solvents with the addition of improving and auxiliary agents. It gives quick-drying, matt, flexible coatings that adhere perfectly to the substrate, with hardness appropriate to the purpose. It is used for priming steel and iron construction elements used indoors and outdoors, to protect them from corrosion. It is recommended for use as a primer under the following topcoats: alkyd, modified alkyd and nitrocellulose.

Unikor R – paint intended for priming steel and iron as well as zinc surfaces, less well prepared, with traces of corrosion or old paint coat.

Phthalic minium – primer paint for priming steel surfaces.

The paint is a suspension of pigments in a solution of alkyd resin in organic solvents with the addition of auxiliary agents. The obtained coating is flexible, adheres well to the substrate, resistant to the action of salt spray. It dries at ambient temperature and gives coatings with very good anti-corrosion properties. Phthalic Minium paint is recommended for priming steel and cast iron surfaces exposed to corrosive factors.

TOPCOATS:

Emalin – general-purpose alkyd enamel used for painting wood, wood-derived, metal, plaster and other previously primed surfaces.

Alkyd enamel produced from high-quality alkyd resins modified in odourless gasoline with the addition of siccatives, auxiliary agents and pigments. It is used for decorative and protective painting of wooden surfaces, wood-like surfaces: WINDOWS, DOORS, Furniture etc., plaster and metals: GATES, FENCES etc., used indoors and outdoors. The obtained coatings are characterised by a high gloss, water resistance and variable weather conditions. It adheres perfectly to the substrate and primer paint coats, has increased resistance to impacts and yellowing.

PRIMER-ENAMELS:

Penetrol – anti-corrosion primer enamel intended for direct painting of less prepared steel or iron surfaces with traces of corrosion or old paint coating,

Penetrol primer-enamel is a product forming single-layer, quick-drying coatings based on synthetic resins with the addition of modifying agents providing excellent protection against corrosion of metal surfaces while maintaining high quality parameters of a two- or three-layer painting set consisting of primer, intermediate layer and top enamel. It adheres very well to the substrate, is resistant to changing weather conditions, can be used on new surfaces as well as on rust-covered surfaces. It is intended for protective-decorative painting of steel and iron surfaces. It is especially recommended for painting steel structures, transport vehicles, agricultural machinery, metal machines and devices, tanks, cast iron castings, gates and fences, metal windows and doors, etc. It is available in glossy, semi-matte, hammer effect, metallic structure effect versions.